Installation method for industrial aluminum profile frames

Release time:

2023-08-21

The method of building aluminum (Al) profile frames: follow the pattern of assembling the main parts first, adding the secondary parts later according to the drawings. If it is a large mechanical equipment frame, it is necessary to follow the method of assembling from bottom to top. Let's take a closer look:
1. Confirm the construction site of aluminum profile frame, select the ground without slope on the plane, and lay a layer of foam cotton or cardboard on the ground to prevent the aluminum profile frame from scratching the surface during construction.
2. Aluminum profiles exhibit excellent corrosion resistance under most environmental conditions, including in air, water (or salt water), petroleum chemistry, and many chemical systems. Classify and place the processed aluminum profiles for easy access.
3. According to the drawings, construct the main body of the aluminum profile frame from bottom to top. It is important to note the connection method of the aluminum profile frame, and the embedded parts need to be pre embedded.
4. Use professional tools to tighten the bolts and nuts.
5. After the construction is completed, it is necessary to check whether there is any looseness at the bolt (composed of head and screw) and nut to avoid safety hazards.
6. After assembly, the surface of the aluminum profile frame needs to be scrubbed and the ground cleaned.